Cedar Posts – Terminal

Description

Any railing needs a strong post at the beginning and end to secure the tensioned cables. These posts are designed to be extra sturdy, yet at the same time thin enough to keep your surroundings open. Our terminal posts are pre-drilled to save time with larger holes so fittings may pass through. Use these posts at the end and beginning of your run.

NOTE: Purchase undrilled posts for stairs. If you are securing your cables to the inside face of your terminal post (rather than securing through the post), order undrilled posts as well as wood post surface mount assemblies.

Benefits/Technical Information:

1. Material: Western Red Cedar
2. Net Size: 3.5″ x 3.5″
3. Length Options:
   • 44″ w/ 11 predrilled holes (requiring 11 cable runs), for a total railing height of 36″ above deck boards
   • 48″ w/ 13 predrilled holes (requiring 13 cable runs), for a total railing height of 42″ above deck boards
4. Naturally resistant to rot, decay, and insect attacks
5. Highly durable, strong, and easy to maintain
6. Engineered to resist checking, cracking, and warping
7. Withstands greater loads over greater distances than solid-sawn wood
8. Sourced from sustainably managed forests
9. Uses less wood fiber per board for increased sustainability

ALL POSTS ARE OVERSIZED AND MUST BE CUT DOWN ON JOB SITE.
CONSIDER THE FOLLOWING:

1. Which METHOD will you use for mounting your posts?
2. What top rail material and design would you like?
3. Use either PROFESSIONAL SWAGING SERVICE or HAND SWAGING.

If using our PROFESSIONAL SWAGING SERVICE at both ends of your cable run, your entire run must be composed of TERMINAL POSTS in order for the swaged fittings to pass through. Get two for each corner. For straight sections, space your posts evenly with a maximum of 4′ between them.

If HAND SWAGING (recommended), you will need TWO TERMINAL POSTS; one at the beginning of your run and one at the end. If you have a particularly long run, or one with a lot of corners, you might consider breaking the railing into smaller cable sections to allow proper cable tensioning, thus requiring additional terminal posts (at the beginning and end of each smaller section). All other posts in your system will be Intermediate Posts. For this assembly method, order thru post fitting assemblies.

For a complete Western Red Cedar wood frame, take a look at our matching Top Rail.

For help or assistance, give us a call at 1-888-686-7245 (RAIL). You can also ask us for a free estimate or send an estimate request form to [email protected]. Our FAQ, WORKSHEET, and VIDEO pages will give you more information about your ordering options.

Product # 734879, 734886, 714232, 714249, 714256, & 714263