FINELINE™ JAW/EYE ASSEMBLY for Cable Deck Railing Systems

Description

The FineLine™ JAW/EYE ASSEMBLY is a compact, architectural assembly that represents the best in engineered cable rail systems for your wood or metal posts. The SURFACE MOUNT EYE mounts directly to the inside surface of your posts and provides a tab (attachment point) for the FineLine™ JAW TURNBUCKLE and FIXED JAW CLEVIS WITH CABLE. Also works great for angled stair cable runs. Articulating design accommodates any stair pitch. Use HAND SWAGING for this assembly type.

• 11 assemblies needed for each cable run 36″ high.
• 13 assemblies needed for each cable run 42″ high.
• TIP: It’s more economical to have longer cable runs that run continuously around corners so fewer fittings are needed.

Wood minimum post requirements: 4″x4″

Minimum metal post requirements:

• STEEL PIPE 2″x 2″x 1/4″ or 1 1/2″ ID or 1 1/8″ OD
• ANGLE IRON or WELDED TAB 2″x 2″x 1/2″
• FLAT BAR 2″ wide and 1″ thick

Parts and services needed to complete this cable assembly:

• FIXED JAW CLEVIS WITH 1×19 CABLE for straight runs and runs with slight bends or FIXED JAW CLEVIS WITH 7×7 CABLE for runs that have 90 degree corners. A FIXED JAW CLEVIS is “fixed” at one end of the cable by pre-swaging (no charge) at the factory and is not to be swaged by hand in the field.
• 1 FineLine™ JAW TURNBUCKLE + 2 SURFACE MOUNT EYE
• Note: For all Assembly lengths >50′ (70′ max) and/or runs from 0-70′ with more than 1 90 degree corner, it is recommended to omit the FIXED JAW CLEVIS WITH CABLE and use 2 FineLine™ JAW TURNBUCKLES instead to allow cable tightening at both ends of your run. In this situation, substitute the FIXED JAW CLEVIS WITH CABLE with STAINLESS CABLE
• Order: CABLE CUTTER + CABLE CRIMPER tools to hand swage your wire rope assemblies.

Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Passivator to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

Need help designing your railing project or an estimate? Email drawings(non-technical OK) to us at: [email protected] and we will respond within 24 hours. See the WORKSHEETS tab for additional resources or just phone/fax us at 1-888-393-9682 (RAIL). We are happy to help!

Product # 724460, 735111, 717561, 717813, 718063, 717578, 717820, 718070, 717585, 717837, 718087, 717592, 717844, 718094, 717608, 717851, 718100, 717615, 717868, 718117, 717622, 717875, 718124, 717639, 717882, 718131, 717646, 717899, 718148, 717653, 717905, 718155, 717523, 717776, 718025, 717660, 717912, 718162, 717677, 717929, 718179, 717684, 717936, 718186, 717691, 717943, 718193, 717707, 717950, 718209, 717714, 717967, 718216, 717721, 717974, 718223, 717738, 717981, 718230, 717745, 717998, 718247, 717752, 718001, 718254, 717530, 717783, 718032, 717769, 718018, 718261, 717547, 717790, 718049, 717554, 717806, & 718056