FineLine™ Jaw / Metal Assembly

Starting Price: $61.95

INCLUDES:

  • 1ea Professional Swaging Service
  • 1ea FineLine Jaw Turnbuckle Tensioner
  • 2ea Threaded Eyes
  • 1ea Fixed Jaw Clevis Terminal End with 1/8in or 3/16in Cable as Chosen Above

    SWAGING TOOL REQUIRED

  • SKU: cable-deck-railing-fineline-trade-jaw-metal-assembly Categories: ,

    Description

    The FineLine™ JAW/METAL ASSEMBLY is a compact, architectural assembly that represents the best in engineered cable rail systems for your metal posts. Drilled holes are tapped for each THREADED EYE. Also works great for angled stair cable runs. Articulating design accommodates any stair pitch. Use HAND SWAGING for this assembly type.

    • 11 assemblies needed for each cable run 36″ high.
    • 13 assemblies needed for each cable run 42″ high.
    • TIP: It’s more economical to have longer cable runs that run continuously around corners so fewer fittings are needed.

    Minimum post requirements:

    • STEEL PIPE 2″x 2″x 1/4″ or 1 1/2″ ID or 1 1/8″ OD
    • ANGLE IRON or WELDED TAB 2″x 2″x 1/2″
    • FLAT BAR 2″ wide and 1″ thick

    Parts and services needed to complete this cable assembly:

    • FIXED JAW CLEVIS WITH 1×19 CABLE for straight runs and runs with slight bends or FIXED JAW CLEVIS WITH 7×7 CABLE for runs that have 90 degree corners. A FIXED JAW CLEVIS is “fixed” at one end of the cable by pre-swaging (no charge) at the factory and is not to be swaged by hand in the field.
    • 1 FineLine™ JAW TURNBUCKLE + 2 THREADED EYE
    • Note: For all Assembly lengths >50′ (70′ max) and/or runs from 0-70′ with more than 1 90 degree corner, it is recommended to omit the FIXED JAW CLEVIS WITH CABLE and use 2 FineLine™ JAW TURNBUCKLES instead to allow cable tightening at both ends of your run. In this situation, substitute the FIXED JAW CLEVIS WITH CABLE with STAINLESS CABLE
    • CABLE CUTTER + CABLE CRIMPER tools to hand swage your wire rope assemblies.

    Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Passivator to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

    Need help designing your railing project or an estimate? Email drawings (non-technical OK) to us at:
    [email protected] and we will respond within 24 hours. See the WORKSHEETS tab for additional resources or just phone/fax us at 1-888-686-7245 (RAIL). We are happy to help!

    For more information and product inspiration, check out our videos on cable railing page.

    Product # 724477, 982598, 717318, 718315, 718568, 717325, 718322, 718575, 717332, 718339, 718582, 717349, 718346, 718599, 717356, 718353, 718605, 717363, 718360, 718612, 717370, 718377, 718629, 717387, 718384, 718636, 717394, 718391, 718643, 717400, 718407, 718650, 717271, 718278, 718520, 717417, 718414, 718667, 717424, 718421, 718674, 717431, 718438, 718681, 717448, 718445, 718698, 717455, 718452, 718704, 717462, 718469, 718711, 717479, 718476, 718728, 717486, 718483, 718735, 717493, 718490, 718742, 717509, 718506, 718759, 717288, 718285, 718537, 717516, 718513, 718766, 717295, 718292, 718544, 717301, 718308, & 718551

    Additional information

    Weight 0.55 lbs
    Cable Type

    1×19 1/8in Cable, 1×19 3/16in Cable, 7×7 3/16in Cable

    Cable Length

    2', 4', 6', 8', 10', 12', 14', 16', 18', 20', 22', 24', 26', 28', 30', 32', 34', 36', 38', 40', 42', 44', 46', 48', 50'

    Reviews

    There are no reviews yet.

    Be the first to review “FineLine™ Jaw / Metal Assembly”

    Your email address will not be published. Required fields are marked *

    You may also like…