Stainless Steel Cable for Cable Railing Systems – 1×19

Description

1×19 cable is the standard infill for cable railing systems. With a simple design of 19 steel strands twisted together, this type of cable is visually sleek and particularly strong, allowing for thinner diameters that better keep your view open without compromising safety.

Unlike the typical rigging cables used in construction, our cable is independently verified and chemically tested to only be Grade 316L: a specific class of marine grade stainless steel that boasts lower carbon content and higher luster. After accepting our cables, we clean and electro-polish them for superior shine and beauty. When you order our cables, you can be sure you’re ordering the highest quality cable out there.

Benefits / Technical Information:

1. Material: 316L or 2507 Marine Grade Stainless Steel.
2. Stainless 2507 options available for applications near salt water or pools.
3. Size Options: 3/16″ or 1/8″
4. Actual Breaking Load: 3/16″ 4719 lbs. / 1/8″ 1890 lbs.
5. All our cable railing hardware and end fittings are engineered specifically for our cable, ensuring compatibility.
6. Mill Test Certificate and Chemical Analysis available on request.
7. Use in predominantly straight runs with no bends over 45 degrees.
8. Priced per foot to prevent excess cable waste.

Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Passivator to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

Product # 017310, 730147, & 730154